Best Iron Filter For Well Water Reviews

Choosing the best Iron filter is very essential for your home when you’re dealing with well water supply. Iron is undesirable content because it can reduce the life span of your home appliances like washer, dryer, etc.

Additionally, It changes the taste & odor of your water. It also gives unpleasant taste to food.

I highly recommend that you must choose the best iron water filter system based on the concentration of iron present in water.

According to the U.S.Geological survey(USGS), 43 millions of Americans uses water from private wells.

Most of the well water contains iron levels between 1 to 10 ppm. In this case, you must install iron removal filter at your home. There are also different types of iron removal methods available based on the iron concentration.

Check out our top pick product for the best iron filter for you.

TOP PICK

iSpring 3-Stage Water Filtration System

Best iron filter for well water

iSpring 3-Stage Water Filtration System

Based on Customer Rating:

Quality
Easy to Install
Value For Money

Overall Rating

4.8


Best Iron Filter for Well Water Reviews

In this section, We have reviewed five products and highlighted some pros and cons for each iron filter system for well water.We looked at the main points are quality, price & performance of the iron filter.

1. iSpring 3-Stage Water Filtration System

OUR #1 RATED

ispring 3 stage water filtration system

Overview & Features:

iSpring 3 stage water filter is specially designed for the removal of iron & manganese from water.

Additionally, this system can remove chlorine,odor,dust,sand & rust. This system contains 3 filters namely sediment filter,carbon filter & iron manganese filter.

First filter, Sediment filter made with multi-layer filtration technology for fewer clogs & minimal pressure loss.

Second filter,Carbon block filter made with high quality coconut shell carbon and highly compact fabrication technology for maximum filtration efficiency and filter life.

Third filter, Iron-manganese filter capable to reduce iron level from 3 ppm to 0.01 ppm & manganese level from 1 ppm to 0.01 ppm.

The output of water quality from this water filter is as safer as drinking water. You can easily prevent your hair & skin issues by using this filtered water.

Pros & Cons:

Pros

  • 3 stage filtration
  • Easy to install
  • Water flow & pressure doesn’t impact
  • Price Range- $$

Cons

  • Water softener required if you also want to remove hardness from water
  • Sometimes it may cause minor leak issue from top threading

This whole house water filter system works very well & deal with all types of iron up to 3 ppm. If you want to go with reputed brand then this is the best choice for you. This is our top pick product for you.

2. Home Master Whole House 3 Stage Water Filtration System

OUR #2 RATED

Home Master Whole House 3 Stage Water Filtration System

Overview & Features:

Home Master 3-stage whole house water filter treats impurities like sediment, turbidity, iron, manganese, sulfur smell, pesticides, herbicides, and other chemicals.

1st Stage Filter, multi gradient depth polypropylene sediment filter. It is designed for purity with bacterial and chemical resistance & for dirt holding.

2nd Stage Filter – Radial Flow Iron, Manganese and Sulfur Reduction Filter. It provides excellent iron reduction with minimal pressure drop (<1 psi pressure drop), Easily and effectively reduces Iron, Manganese and Sulfur from water.

 3rd Stage Filter, which contains granular activated coconut shell carbon. It removes chlorine, chemicals, taste, and odor from water.

Pros & Cons:

Pros

  • Easy to install
  • Cartridge life 100,000 gallons
  • Produce clean & tasty water
  • Water flow & pressure doesn’t impact
  • Price Range- $$

Cons

  • Water softener required if you also want to remove hardness from water
  • Doesn’t work with acidic water,chlorinated water & water with iron bacteria

Home master whole house water filter system works very well & deal with all types of iron up to 3 ppm.

3. Fleck Iron PRO 2 Water Softener System

OUR #3 RATED

Fleck Iron PRO 2 Water Softener System

Overview & Features:

Fleck pro 2 is a combo type water treatment system that comes with water filter & water softener. This system not only removes iron but also hardness from water & makes the water soft.

This system is easily handle iron level between 6 to 8 ppm, hardness up to 75 gpg & manganese up to 6 ppm. It has a capacity of 64,000 grains & comes with 5 years of warranty.

Fully programmed digital controlled head makes the system easy to monitor & handle. It allows you to do some simple adjustments so that you can maximize the capacity with minimum salt usage.

Pros & Cons:

Pros

  • Combo system (water softener+water softener)
  • Easy to install
  • Easily handle iron level between 6-8 ppm
  • Comes with programmed digital control

Cons

  • Removes ferrous iron only
  • Heavy System difficult to move
  • Outage of power supply may affect the system
  • Price range- $$$

This water treatment system is the best choice when the concentration of ferrous iron is between 6-8 ppm in your supply water & only ferrous iron is present in water. This system can’t remove any other form of iron.

4. Fleck Iron 5600 SXT Water Softener System

OUR #4 RATED

Fleck Iron 5600 SXT Water Softener System

Overview & Features:

This product is very popular & known as a long-lasting whole house water treatment softener system. The metered system of this product saves salt & also, water which is used for backwash.

System contains high quality resin which is long lasting & more efficient. The Fleck 5600 metered valve & pentair structural tanks are manufactured with high quality material in the USA.

It comes with 5 years of warranty on valves & 10 years of warranty on tanks. This is easy to install system.

Pros & Cons:

Pros

  • Long lasting product
  • Saves salt & water
  • 5 years of warranty on valves
  • 10 years of warranty on tank

Cons

  • Only remove ferrous iron up to 2 ppm
  • Not remove manganese, chlorine
  • Price Range $$$

This water treatment system is the best choice when the concentration of ferrous iron is less than 2 ppm in your supply water & only ferrous iron is present in water. This system can’t remove any other form of iron.

5. Air Injection Silver AIS10-25SXT AFW System

OUR #5 RATED

Air Injection Silver AIS10-25SXT AFW System

Overview & Features:

This system is designed based on the air-injection method & it can easily remove iron up to 27 ppm, Hydrogen sulfide up to 17 ppm, Manganese up to 11 ppm.

The air-injection system creates an air pockets so that contaminants like iron,manganese & sulfide are oxidized & then finally filter it out from water. This action takes place in one tank.

The tank contains flox media that will lasts around five years. No chemical addition is required & It is fully automatic system.

Pros & Cons:

Pros

  • 3 stage filtration
  • Easy to install
  • Remove all types of iron
  • Removes hydrogen sulfide & manganese

Cons

  • Can’t remove water hardness
  • Price $$$$

This system is best choice when iron concentration is very high up to 27 ppm.

Iron Filter Vs Water Softener – Which One Should I Choose?

This is the common question we get from most of the people & they confused between the two. Let’s clear the doubt & understand the difference:

iron filter vs water softener

Iron filter:

As the name suggests a primary function of an iron filter is to remove iron from water. In addition to that, it can also remove bacterial iron, manganese, sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs from water.

Iron filter can’t remove hardness from water. This is the limitation of iron filters.

Consider Iron Filter

  • Iron level is up to 3 ppm
  • Want to remove other contaminants like chlorine, rust, VOC, etc.

Not Consider Iron Filter

  • Iron level is greater than 3 ppm
  • Want to remove hardness from water

Water Softener:

The main function of a water softener is to remove hardness from water. Additionally, It can remove only ferrous iron(Fe+2) from water when the concentration is up to 2 ppm.

The main function of water softener is to remove hardness from water.Additionally, It can remove iron(only ferrous(Fe+2) iron) from water but It can’t remove other types of iron from water.

Consider Water Softener

  • Want to remove hardness
  • Want to remove only ferrous iron <2 ppm

Not Consider Water Softener

  • Ferric Iron present in water
  • Want to remove other contaminants like chlorine, odor, etc

What Does an Iron Filter Do?

Iron is the most common mineral found in almost every well water. It is beneficial to health if we talking about nutrient but this is not the case with water.

It change the taste of water & make it bad in taste. Additionally, If iron level in your well water is very high then it can also damage your body.

As per WHO guideline, daily recommended dosage of iron for male is 8 milligrams & for females it is 18 milligrams. Additionally, high dosage of iron creates heart & liver issues.

Apart from this internal damage it can also damage your skin by clogging on your skin. It can also create hair loss issues.

Hence, the installation of best iron filter for well water is always a good idea.    

Advantage of Iron Filter:

You must know the advantages of any product that you want to buy to ensure that it fulfill your requirement.

✔ Iron Removal

High level of iron in water is harmful for your water appliances as well as your health. Iron filter is capable to remove all types of iron including bacterial iron, contaminants & pollutants.

iron filter removes sediment up to 40 micron size.

You’ll get safe, clean, odor free & tasty water to your home water supply.

✔ Chemical Free Method

Iron filter doesn’t require any chemical to work. It can efficiently remove impurities from water without the use of any chemical.

✔ Increase life of water appliances

Water that contains high level of iron clog on the pipes & corrode the surface. Additionally, It produces stains which is very difficult to remove.

With the use of iron filter, you can easily protect the system from above issues which increase the life of water supply equipment.

✔ Low Maintenance

Most of the iron filters comes with self cleaning features so, you don’t need to worry about the cleaning of it.

It comes with a controller & proper user interface so that you can easily monitor the condition of it.

Iron filter is very easy to use & maintain. It requires very little or No maintenance.

Buyer’s Guide for best iron filter for well water:

As you know iron filter is the most popular solution to remove iron from well water. There are some key factors you need to consider before buying any iron filtration system.

Lifespan of Iron Filter:

Lifespan of iron filter is depends on how much water you treat per day as per your requirement.

Hence, pick the filter size as per your water & flow rate requirement. Usually, bigger the filtration capacity is equal to longer time.

Always check and ensure the condition of your filter & filtration system on regular interval.

Types of The Iron Filter:  

Iron filtration system comes with many different varieties & designs. 

I highly recommend you should pick at least 2 step variant filter because it can not only remove the iron but additionally, it can remove other pollutants like bacteria, heavy metals etc.

If you want to buy the best and perfect iron filter for your home then you must choose a 3 step variant filter. It can gives you an additional protection from most of the pollutants like heavy metals, bacteria, viruses, sediments, contaminants, particles and other impurities found.

Ease of Installation:

Obviously, You should pick a iron filter that is easy to install. Look for the iron filter that comes with clear set of instruction & installation steps.

Normally, most of the iron filters are very easy to install. if you find difficult to install on your own then you can take help of professional.

How to Pick a Best Iron Filter?

Picking the best iron filter is very simple process follow below guide. Iron filters are divided in four categories. I will explain in details so that you can take the decision very easily. I handpicked the best product of each category for you.

1st Category of Iron Filter:

This type of iron filter deals with all types of iron including red water iron up to 3.0 ppm. Additionally, it can capable to remove manganese, chlorine & odor from water. But keep in mind It can’t remove hardness from water.

In conclusion, Choose this type of iron filter when you want to remove all types of Iron up to 3.0 ppm.

2nd Category of Iron Filter:

2nd category filter is basically a water softener. It has dual functionality that means It can remove red water iron as well as water hardness from water. Softener can remove only ferrous iron from water up to 2.0 ppm. It can’t remove other types of iron. Don’t pick this types of system if ferric iron is present in your water or concentration of iron is greater than 2.0 ppm.

In conclusion, Choose this type of system where only ferric iron iron is present less than 2.0 ppm & you also want to remove hardness from water.

Check this filters:

3rd Category of Iron Filter:

3rd Category filter is basically a combo package where water softener & water filters are both used. The main advantage of this water treatment system is that it can remove water hardness as well as iron from water. It can easily deal with iron level up to 8.0 ppm but it can only remove soluble or ferrous iron from water. This system isn’t working very well when ferric or other types of red iron present in water.

This system isn’t capable of remove hydrogen sulfide(H2S) from water.

In conclusion, Choose this combo system when you want to remove higher concentration of ferrous iron up to 8.0 ppm & hardness from water.

Check this filters:

4th Category of Iron Filter:

This is the final category of iron filter. This types of filter works based on of air oxidation method. It can capable to remove iron from water up to 27 ppm. Additionally, It can remove Hydrogen sulfide up to 17 ppm, Manganese up to 11 ppm.

In conclusion, Choose this 4th category filter when iron concentration is very high in your water.

Check out best filters:

Wrap it up:

All the best whole house iron filters we reviewed can help to remove iron from well water. We looked at all factors like reasonable priced and superb build quality.

After reviewing all the products the best iron filter for well water is iSpring 3-Stage Water Filtration System

This product offer good value for money and made with high-quality materials making them durable. This iron filtration system help to reduce iron as well as manganese from water.

Frequently Asked Questions(FAQ):

How long does an iron filter last?

It totally depends upon two factors quality of your inlet water & quality of iron filter. Some filters can lasts longer while some of them needs frequent replacements. It is advisable to read reviews to find out which iron filter lasts longer.

How to care & clean iron filter?

Check and monitor your iron filter condition every six month. Normally, iron filter needs to be replaced twice per year but it totally depends on inlet water quality.

How to remove iron from well water naturally?

Generally, iron can’t be removed from water naturally. It can easily removed by using iron filter.

How does iron get into well water?

When rain fall on the earth, iron which is present in the earth’s crust dissolved in water & penetrate through the first layer of the earth’s surface.

Pin It on Pinterest

Scroll to Top